This would be my "If I won the lottery" truck..
https://www.youtube.com/watch?v=7DAJnRZAQ20
Type: Posts; User: bill_bly_ca
This would be my "If I won the lottery" truck..
https://www.youtube.com/watch?v=7DAJnRZAQ20
Watching the BBC this AM it looks like indian cases doubled in 10 days, and has exceeded the first wave by 20% already. It took six weeks for case double in wave one they state.
So a good chance...
Hobo Shoestring is on hte hunt for new digs in Alaska - Views of the mountains from his current top choice is really nice...
Seward AK
https://www.youtube.com/watch?v=xlmDxpPkzQk
That is the hot bed for the conspiracy stuff of late - You don't "see" Covid (People sick in their homes, sick in hosplitals etc etc) you "hear" it.
That being said - Somehow MINSA had either the...
As per Kelvin's new site - Vaccines will start to dry up in Niclandia
Nica-biz
I watched this fellows series on rebuilding a 1990 Yota pickup Previous owner did a 3.4 six swap and botched it real bad - This fellow brought her up to snuff with some real nice additions.
...
And don't forget Taiwan - We did not let those others get (and maybe they did not have the capability of) getting as big - Not disputing it - Just saying that part of this mess is our own doing..
Granted - But it is the 1st world consumer that enabled the entire situation.. If it was not for us, they (the Made in China stamp) would be relegated to Niagara falls / Grand Canyon trinkets and...
We ( the US, Commonwealth and EU) all made a conscious choice to have price as the leading factor in our consumption patterns - I see no surprise that we sold our own manufacturing prowess for cheap...
Daddy Doug goes over an Excursion
Back in '08, when we bought the Expedition, a 7.3 excursion was on the short list a we toyed with towing our travel trailer.
They were massive and a real...
Yes massivly good stuff there..
My main catalyst is replacing broken plastic parts on some old radios I have. There is also a 3D scanner that costs about $150 where you can scan parts for...
Youtube university... What the Tubists seem to say at the moment is the Ender 3 pro V2, at a couple hundred bucks, are the best to start with.
My extruder tip and feeder are ender branded.
Controller is a RAMPS 1.4 - IIUC it is the same as an Ender 3 V1
I figured out that the parts I had I could make a 500mm^3 printer for the same a...
No knife tomorrow - Consultation with orthopedic surgeon - They may x-ray here and there for further treatment options.
Back in Dec I decided I was going to do more "things" rather than sit ont...
This fellow has some cool DIY tools. In this one he makes a DIY oil sucker for items that do not have, or it is too much trouble too, change the oil..
https://www.youtube.com/watch?v=Uk46vCOGTFI
Do you get to choose the conspiracy theory that you are injected with? Mad cow would be a good way to go though. Parkinson's with atitude - I can then actually BE "What's shak'n"
But in good news (for us) our postal code (N2C-***) has been identified as a "hot spot" so as of 6 AM tomorrow I can register for micro chip, zombie, horn growing out of forehead injection. ...
(Expecting a chorus of 'told ya so)
Premier is announcing a full lock down at 2 today - Even the big box stores will be limited only groceries. 4 Weeks...
Totals with a Lockdown "light" was...
RVerTV is a rather folksy hokey fellow who drives around the US in his modified van..
A lot of "Will you look at that" and a semi annoying laugh - But he does a good cross section of the...
True that...
Matters of public health are a provincial responsibility, so the feds could keep the border closed and airports restricted to international travel, but each province manages its own health regime.
...
His date with the knife is Friday - No time yet, but Friday
Yes - Cost so far is 2 hrs of (my) vacation time and maybe a 1/4 tank of gas
OUCH ..
So on Sunday the 21th youngest son decided he was going to be Tony Hawk and went skate boarding at the local mall parking lot.
He called me around 2 saying he fell and can't walk home ...
Well the point I was trying to make was 1) US over 30% vaccinated 2) US has your own supply chain - Because of that The US Corvid troubles have an end point within clear view. Other worries I was...
Well the US has little to worry about - Herd immunity via vaccination to majority of variants will be attained by end May time time period.
UK and Israel is there already
Canada _should_ be...